ThingMagic sale M6E-M UHF lowest RFID Module Micro Carrier Board (Global) online

ThingMagic sale M6E-M UHF lowest RFID Module Micro Carrier Board (Global) online

ThingMagic sale M6E-M UHF lowest RFID Module Micro Carrier Board (Global) online
ThingMagic sale M6E-M UHF lowest RFID Module Micro Carrier Board (Global) online__front
ThingMagic sale M6E-M UHF lowest RFID Module Micro Carrier Board (Global) online__right
ThingMagic sale M6E-M UHF lowest RFID Module Micro Carrier Board (Global) online__below

Description

ThingMagic Micro module (M6E-M) soldered to a carrier board with M6E form factor. The Micro is designed to meet the demands of high performance RFID handheld, mobile, and stationary readers. This embedded UHF RFID Reader offers two antenna ports and supports the ability to transmit up to +30 dBm for demanding applications. The edge connections for signals, power, and RF allow the module to be soldered directly to a motherboard as a standard component. The on-board connectors allow the module to be mated to a motherboard as an add-on option. The ThingMagic Micro Carrier Board is NOT intended to replace the compatible M6e Family Development Kit. This carrier board is recommended for use in conjunction with the ThingMagic Micro Embedded RFID Module Developer Kit. NOTE: This product is a carrier board– NOT a finished RFID reader – and is meant for OEM and developers to embed into products or to be used in the creation of a new finished reader. ELECTRICAL: Air Interface Protocol - Standard: EPCglobal Gen2V2 (18000-63) Air Interface Protocol - Additional: ISO18000-6B, IP-X 64, 128 & AEI ATA are available through additional license Operating Frequency: Global (see module data sheet for more info) Transmit Power: -5 to +30 dBm Max Receive Sensitivity: Not Published Max Read Distance: Over 9 m (30 ft) Max Read Rate: Up to 750 tags/second Data Interface: UART 3.3/5V; USB 2.0 GPIO: Two 3.3V bidirectional ports Power Source: DC: 3.5 to 5.25V MECHANICAL: Dimensions: 69 x 43 x 15 mm (2.72 x 1.69 x 0.59 in) Weight: 0.034 kg (0.08 lb) ENVIRONMENT: IP Rating: Not Published Operating Temperature: -20° to +60°C (-4° to +140°F)

Features & details

Features

  • The ThingMagic Micro Carrier Board is a perfect solution for prototyping and proof-of-concept applications.
  • The board includes the thermal advantages of solder-down and heat spreader.
  • 2 MMCX RF antenna connectors. Integral heat spreader.
  • Note: Product cannot ship to Brazil.
  • The ThingMagic Micro Carrier Board is NOT intended to replace the compatible M6e Family Development Kit. This carrier board is recommended for use in conjunction with the ThingMagic Micro Embedded RFID Module Developer Kit.

Product information